Rotel RSX-1058 Owner's Manual download pdf (Page 24)

RSX-1058 Surround Sound Receiver

Front-panel Display

The ﬂuorescent (FL) display in the upper por-

tion of the RSX-1058 provides information

about the status of the unit, tuner reception,

and activation of special features. The main

portion of the display typically shows the cur-

rent input source (or radio station frequency)

selected for listening on the left side and the

current volume level on the right.

Icons along the left side of the display show

the currently selected digital input. Icons at

the right of the display show individual sur-

round channels and are used in conﬁgur-

ing the system. Icons across the bottom of

the display show the current surround mode

and other special features. Icons at the top

of display assist in tuning radio stations and

operation of RDS/RBDS features.

The FL display can be turned off, if desired. See

the MENU button section for instructions.

Remote Sensor

This sensor receives IR signals from the remote

control. Do not block this sensor.

NOTE: The remainder of the buttons and

controls on the front panel are described in the

Overview of Buttons and Controls section.

Remote Control Overview

The RSX-1058 includes a full-function learning

remote control that can operate the RSX-1058

plus nine other audio/video components.

A separate manual gives detailed instructions

on programming and using the RR-1060 to

replace all of the remote controls in your sys-

tem. The RR-1060 manual covers many extra

features (such as custom labeling of remote

buttons that appear in its LCD display). To

avoid duplication, we provide only basic in-

formation about using the RR-1060 to oper-

ate the RSX-1058 in this manual.

Many of the RR-1060 functions duplicate the

front-panel controls. For that reason, we cover

the controls on the remote under appropriate

topics throughout this manual. Letters in gray

boxes next to the name of a function refers to

the labeled illustration of the remote at the front

of this manual.

Using the RR-1060

AUDIO Button

To operate the RSX-1058 with the remote,

make sure that the AUDIO mode is active by

pressing the AUD button on the remote be-

fore you start. If one of the other buttons (CD,

TAPE, etc.) is pressed, the remote will control

another component, not the RSX-1058. The

AUDIO mode will stay active until another

DEVICE/INPUT button is pressed.

Overview of Buttons

and Controls

This section provides a basic overview of the

buttons and controls on the front panel and

the remote control. Detailed instructions on

the use of these buttons are provided in the

more complete operating instructions in the

following sections. Buttons or controls identi-

ﬁed with a number appear on the front panel.

Those identiﬁed with a letter appear on the

remote control. When both a number and a

letter appear, the control is duplicated on both

the front panel and the remote control.

STANDBY Button

POWER Button

The front-panel STANDBY button and the re-

mote control POWER button activate or deac-

tivate the unit. The rear panel master POWER

switch must be in the ON position for the re-

mote standby function to operate.

ON/OFF Buttons

The power ON and OFF buttons on the remote

provide discrete ON and OFF commands to

activate the unit or put it in standby mode.

The rear panel master POWER switch must

be in the ON position for the remote standby

function to operate.

All OFF command: A long press of the

OFF button (more than 3 seconds) sets all

rooms to standby, from any room.

VOLUME Knob

VOLUME Button

The large rocker button on the remote and

the large rotary control on the front panel

provide the master VOLUME control, adjust-

ing the output level of all channels simulta-

neously.

MUTE Buttons

Push the MUTE button once to turn the sound

off. An indication appears in the front panel

and on-screen displays. Press the button again

to restore previous volume levels.

NOTE: Pressing the volume buttons on the re-

mote also cancels the muting function.

LIGHT Button

Press this button on the side of the remote to

turn the backlighting on for using the remote

in a dark room.

DEVICE/INPUT Buttons

The top row of buttons on the front panel plus

the MULTI INPUT button are used to select

source inputs for listening/viewing.

These buttons are duplicated on the remote,

except that the MULTI INPUT button is la-

beled EXT and the remote buttons have two

functions:

Short press: A short press of any button

changes the device that the remote oper-

ates, but does not change the RSX-1058’s

input selection.

Long press: A longer press changes the

remote control device and changes the

source input for listening/viewing in the

main room.

NOTE: A long press of the EXT button changes

the input to the 7.1 channel analog MULTI IN-

PUT. Pressing the AUD button only changes the

remote device; there is no input source associ-

ated with this button.

D-SLT Button

Press this button to change the digital input

associated with the current source input.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 91 92

Comments to this Manuals

No comments

Rotel RSX-1058 Owner's Manual Page 24

Comments to this Manuals

Related products and manuals for DVD players Rotel RSX-1058