Rotel RSP-1066 Owner's Manual download pdf (Page 26)

Two of the default surround mode settings

available on this menu offer additional choices.

Dolby Pro Logic II decoding offers a choice

of CINEMA, MUSIC, or EMULATION settings.

DTS Neo:6 decoding offers a choice of CIN-

EMA or MUSIC settings. When either Dolby

Pro Logic II or DTS Neo:6 is selected with this

menu item, the current setting choice will also

be displayed. In addition, the function of the

ENTER button changes, taking you to a sub-

menu where you can change the settings and/

or additional parameters for Dolby Pro Logic

II or DTS Neo:6 decoding. See the following

section for details.

To return to the MAIN menu (except when Dolby

Pro Logic II or DTS Neo:6 is selected in the

SURR MODE field), press the ENTER button.

Press the MENU key on the remote to cancel

the menu display and return to normal opera-

tion.

NOTE

: We suggest that you return to this menu

after connecting each source component to

properly configure that source.

DTS Neo:6 Sub-Menu

DOLBY PRO LOGIC II Sub-Menu

DTS Neo:6

MODE: CINEMA

ENT KEY=input setup

+/– KEY=change

When Dolby Pro Logic II or DTS Neo:6 is

selected as the default surround mode on the

INPUT SETUP menu (see previous section), there

are additional option settings and parameters

available to optimize the surround decoding

for various types of recordings, music or movie

soundtracks.

These settings are changed using one of the

DOLBY PRO LOGIC II or DTS Neo:6 submenus,

reached by pressing the ENTER key from the

INPUT SETUP menu when either of these sur-

round modes is selected.

The sub-menu will be similar to the example

shown above, with the title at the top of the

screen indicating either DOLBY PRO LOGIC

II or DTS Neo:6 depending on the surround

mode.

In DTS Neo:6 surround mode, there will

only be one choice available on the sub-menu:

selecting CINEMA or MUSIC modes. Use the

+/– keys on the remote to change the settings.

• Select CINEMA to optimize the DTS Neo:6

decoding for movie soundtracks.

• Select MUSIC to optimize the DTS Neo:6

decoding for musical recordings.

In Dolby Pro Logic II surround mode,

there will a similar choice available on the sub-

menu except that there are three options:

CINEMA, MUSIC, or EMULATION modes. Use

the +/– keys on the remote to select a mode.

• Select CINEMA to optimize for Dolby

Surround encoded movie soundtracks, us-

ing the enhanced matrix decoding of Dolby

Pro Logic II including increased surround

separation and full-bandwidth surround

channel frequency response.

• Select EMULATION for Dolby Surround

encoded movie soundtracks using decod-

ing logic that emulates the original Dolby

Pro Logic system. You may prefer this op-

tion for older movie soundtracks that are

not of optimum audio quality. Compared

to the CINEMA setting, EMULATION mode

will reduce the high-frequency response and

separation of the surround channels and

may increase the delay setting to the sur-

round channels for a more spacious effect.

• Select MUSIC to optimize for musical re-

cordings. When the MUSIC mode is se-

lected, three additional parameter will be

available as shown in the following screen:

DOLBY PRO LOGIC II

MODE: Music

OPTIONAL PARAMETERS

PANORAMA: Off

DIMENSION: 3

CENTER WIDTH: 0

ENT KEY=input setup UP KEY=up

+/– KEY=change DWN KEY=down

Use the UP/DOWN keys on the remote to select

a parameter. Use the +/– keys to change the

selected parameter as follows:

• PANORAMA: The Panorama option

extends the front stereo image to include

the surround speakers for a dramatic “wrap-

around” effect. The options are OFF or ON.

• DIMENSION: The Dimension option al-

lows you to gradually adjust the soundfield

towards the front or towards the rear. There

are seven incremental settings from 0 to

6. A setting of 0 shifts the soundfield to-

wards the rear for maximum surround ef-

fect. A setting of 6 shifts the soundfield to

the front for minimum surround effect. The

default setting of 3 provides a “neutral”

balance between the two extremes.

• CENTER WIDTH: The Center Width option

allows you to send some of the signal in-

tended for the center speaker to the left and

right front speakers, thus widening the

perceived soundfield. There are eight in-

cremental settings from 0 to 7. With the

default setting of 0, there is no center width

spreading and all of the center channel

information is sent to the center speaker .

The maximum setting of 7 shifts all of the

center channel signal to the left and right

speakers, essentially muting the center

speaker and maximizing the soundfield

width. Other settings provide incremental

steps between the two extremes.

When you have completed all the desired

adjustments, press the ENTER key to return to

the INPUT SETUP menu.

RSP-1066 Surround Sound Processor

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Comments to this Manuals

No comments

Rotel RSP-1066 Owner's Manual Page 26

Comments to this Manuals

Related products and manuals for AV receivers Rotel RSP-1066