Rotel RCC-1055 User Manual download pdf (Page 9)

Playing Discs

Play Buttons and

Press the Play Button to play the disc indicated

in the Disc Display. The disc will begin play-

ing with Track 1, unless another track has been

selected before the Play button is pressed.

Unless one of the Repeat Play functions has

been selected:

• After the last track on discs 1 through 4 is

played, the next disc is selected and play

continues with track 1 of the disc.

• At the end of disc 5 disc play stops.

See the Repeat Play section for more infor-

mation.

Pause Button

Press the Pause Button to temporarily stop

playing the disc. Press the Pause Button again,

or the Play Button, to resume playing the disc

at the same track and time.

Stop Button

Press the Stop Button to stop playing the disc.

The disc will remain selected but the track

selection will go back to track 1.

Track Skip Buttons

When a disc is not playing:

• Press the button to select the next track

on the disc. Press and hold the

but-

ton to advance more than one track on the

disc.

• Press the

button to select the previous

track on the disc. Press and hold the

button to go back more than one track on

the disc.

When a disc is playing:

• Press the

button to skip the rest of track

being played and begin playing at the

beginning of the next track on the disc. Press

and hold the

button to advance more

than one track on the disc.

•Press the

button to return to the be-

ginning of the track being played. Press

and hold the

button to go back more

than one track on the disc.

Track Selection Buttons

(remote only)

To select a specific track on a disc, press the

corresponding Track Selection buttons. The

selected track immediately begins playing. To

select tracks higher than number 10 use the

“>10” button. For example, to select track 17,

press the “>10” button then the “7” button.

NOTE: When the RCC-1055 is in Pro-

grammed Play mode, the Track Selection

buttons are used to select tracks to be

added to the program. See the Pro-

grammed Disc Play section.

Search Buttons

(remote only)

Press and hold the or buttons to quickly

search a disc in the forward or reverse direc-

tion. For the first five seconds the search speed

will be approximately four times normal play-

ing speed. After three seconds the search speed

will increase to approximately 20 times nor-

mal playing speed. The sound volume is re-

duced while the search function is being used.

The search function may be used when disc

play has been temporarily stopped with the

Pause function, however no sound is heard.

The Search function will not go past the be-

ginning or end of the selected disc.

About HDCD

HDCD discs are encoded with a high density

data stream. During playback this high den-

sity data stream is decoded to a conventional

digital signal. This HDCD encode/decode sys-

tem greatly reduces the errors that are nor-

mally generated during the analog-to-digital,

and then digital-to-analog, conversions. The

HDCD system is automatically activated, and

the HDCD Indicator

lights, whenever an

HDCD disc is played.

Display Panel

The Disc Indicators shows the positions in

the Disc Tray that have discs in them.

The Play Indicator

is lit whenever a disc

is playing.

The Pause Indicator

is lit when disc play

has been temporarily stopped with the Pause

button.

The Disc Selection Indicator

typically shows

the number of the disc currently selected. If

the Remaining Disc Playing Time display op-

tion has been selected the Disc Selection In-

dicator changes to a “–”. See the Time Dis-

play section.

The Track Indicator

shows either the track

that is selected, the total number of tracks on

the disc, or the number of tracks that remain

on the disc. See the Time Button section.

One of the Repeat Play Mode Indicators

will light if one of the repeat play options has

been selected. See the Repeat Play Button

section for more information.

The Random Play Indicator

is lit when one

of the random play options is being used. See

the Random Play section.

The Program Play Indicator

lights when-

ever the track programming function is acti-

vated. See the Programed Play Section.

The Intro Scan Indicator

is lit when the Intro

Scan feature is activated. See the Intro Scan

section.

The Remaining Time Indicator

lights when

one of the alternative time display functions

is activated. See the Time Display Section.

The Time Display

shows either the total

playing time of the disc that is selected, the

amount of time the current track has been play-

ing, the remaining playing time of the current

track, or the remaining time of the disc that

is playing. See the Time Button section.

English

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Comments to this Manuals

No comments

Rotel RCC-1055 User Manual Page 9

Comments to this Manuals

Related products and manuals for CD players Rotel RCC-1055