Rotel RSX-1562 Owner's Manual download pdf (Page 5)

English

WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service

personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water.

Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases,

on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture,

or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take

the unit to a qualified service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Follow all

operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the

unit.

Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings.

If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper

cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that

produces heat.

WARNING: The rear panel power cord connector is the mains power disconnect device. The apparatus

must be located in an open area that allows access to the cord connector.

The unit must be connected to a power supply only of the type and voltage specified on the rear panel.

(USA: 120 V/60Hz, EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied power supply cable or an exact

equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than

the other. A grounding plug has two blades plus a third grounding prong. These are provided for

your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug does

not fit your outlet, please consult an electrician for replacement of the obsolete outlet. Do not use

extension cords.

The main plug of the power cord set is a disconnect device of the apparatus. In order to completely

disconnect the apparatus from the supply mains, the main plug of the power cord set should be

unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the power

cord is unplugged. The disconnect device shall remain readily operable.

Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged

in any way. Pay particular attention to the power cord at the plug and where the cord exits the back

of the unit.

Main plug is used as the main disconnect device and shall remain ready accessible.

The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to

be left unused for a long period of time.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when

moving the unit in a stand or rack to avoid injury from a tip-over.

Use Class 2 wiring for speaker connections to ensure proper installation and minimize the risk of

electrical shock.

Immediately stop using the component and have it inspected and/or serviced by a qualified service

agency if:

• Thepowersupplycordorplughasbeendamaged

• Objectshavefallenorliquidhasbeenspilledintotheunit

• Theunithasbeenexposedtorain

• Theunitshowssignsofimproperoperation

• Theunithasbeendroppedordamagedinanyway

The batteries in remote control shall not be exposed to excessive heat such as sunshine, fire or the

like.

WARNING: The master power switch is located on the rear panel. The unit must allow unobstructed

access to the main power switch.

Important Safety InstructionsNotice

The COMPUTER I/O connection should be handled by authorized persons only.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

•Reorientorrelocatethereceivingantenna.(TV,radio,etc.)

•Increasetheseparationbetweentheequipmentandreceiver

•Connecttheequipmenttoanoutletoncircuitdifferentfromthattowhichthereceiveris

connected.

•Consultthedealeroranexperiencedradio/TVtechnicianforadditionalhelp.

Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following to

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Some products are intended for sale in more than one country and as such are supplied with more

than one power cable. Use only the type applicable to your country. If in doubt please consult with

your authorized Rotel dealer. r

NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna installer’s attention to

Article 820-40 of the NEC. This provides guidelines for proper grounding and, in particular , speciﬁes

that the cable ground shall be connected to the grounding system of the building, as close to the

point of cable entry as practical. See installation diagram.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against interference in a residential installation. This equipment generates and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause interference to radio or TV communications. There is no guarantee that interference will

not occur in a particular installation. If this equipment does cause interference to radio or television

reception, which can be determined by turning the equipment off and on, try to correct the

interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheunitandthetelevisiontuner.

•ConnecttheunittoanACpoweroutletonadifferentelectricalcircuit.

•ConsultyourauthorizedRotelretailerforassistance.

1 2 3 4 5 6 7 8 9 10 ... 50 51

Comments to this Manuals

No comments

Rotel RSX-1562 Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for AV receivers Rotel RSX-1562