Rotel RSX-1562 Owner's Manual download pdf (Page 43)

English

will begin scanning up or down through the frequencies until the next

available signal is detected. If this is not the desired station, repeat

the automatic tuning procedure to ﬁnd the next station. Weak stations

will be skipped during auto tuning.

In the PRESET tuning mode, press a TUNING button (CH +/- L on

the remote) and release to jump to the next memorized station preset.

Note: Toggle between FREQUENCY and PRESET tuning by pressing

the P-TUN button D on the remote.

In the RDS PTY search mode, press a TUNING button (CH +/- L on

remote) to select the desired program type from the scrolling list in the

display. See the section on RDS tuning for more details.

MEMORY Button =H

The MEMORY button (labeled MEM on the remote) is used with the

NUMERIC buttons to store memorized station presets. See the next

section for detailed instructions.

NUMERIC Buttons : Station Presets =8HG

The receiver can store up to 30 station presets for recall at any time

using the NUMERIC buttons on the front panel. To memorize a

station:

1. Tune to the desired station, AM or FM.

2. Press the MEMORY button (MEM on remote). A MEMORY

indicator will ﬂash for ﬁve seconds in the front-panel display.

3. While the MEMORY indicator is ﬂashing, press the number of the

preset where you wish to store the station frequency. For example,

to memorize the station as preset 3, press the 3 button. To memorize

preset 15, press the 1 button followed by the 5 button.

4. A previously stored frequency is erased from memory when a new

frequency is memorized for the same preset number.

To tune to a previously memorized station, just press the preset number

on the NUMERIC buttons. For example, to tune to preset 3, press the

3 button. To tune to preset 15, press the 1 button and then press the

5 button.

Note: If the TUNER is not already the selected input, pressing a

NUMERIC button on the front-panel activates the TUNER. If using the

NUMERIC buttons on the remote, first manually select the tuner input

(press TUN button M), if not already activated.

The NUMERIC buttons can also be used for direct access tuning (see

next section)

DIRECT Button 9

FRQ-D Button (“10+” key)

If you know the frequency of the desired station, you may tune it

directly using the DIRECT button and the NUMERIC buttons.

1. Press the DIRECT button on the front panel or the FRQ-D button

on the remote to change the NUMERIC buttons from station preset to

Direct Access mode. The station frequency in the front panel display

will change to a series of four bars, representing the digits of a station

frequency, with the ﬁrst bar ﬂashing.

To change a setting, place the highlight on the desired line using the

Up/Down buttons and use the Left/Right buttons to increase or decrease

the delay. To return to the MAIN menu, press the ENT button. Press the

RCVR/SETUP button on the remote to cancel the display and return to

normal operation.

Tuner Controls

This Rotel receiver features a digital synthesized AM/FM tuner with

RDS capability and 30 station presets. The unit offers a wide range of

tuning options. Here is an overview of tuning options.

Manual frequency tuning • tunes up or down to the next station

frequency (when in frequency tuning mode). Press and release a

TUNING button (CH +/- L on the remote) to tune.

Direct frequency tuning• lets you enter the desired station frequency

digits. Press the DIRECT button (or FRQ-D button H on the remote)

and enter the digits using the NUMERIC buttons 8G.

Automatic frequency search tuning• searches up or down to ﬁnd

the next receivable broadcast signal. Press and hold a TUNING

button (CH +/- L on the remote) for at lease one second to search

up or down.

Station preset tuning• lets you directly enter the number of a memorized

station preset. Enter the number of the memorized preset using the

NUMERIC buttons.

Preset tuning• jumps up/down to the next memorized station preset.

When in PRESET mode, press a TUNING button (CH +/- L on the

remote) to select the next station preset. Press the P-TUN button

D on the remote to toggle between preset and frequency tuning

modes.

RDS (Europe) or RBDS (USA) tuning• provides a range of special

tuning and search features based on data codes encoded with the

broadcast signal. See the RDS section of this manual for detailed

information.

Note: The receiver comes configured for tuning in the market where

you purchased it. (N. America or Europe). To change this default

setting, see the information on the DEFAULT SETUP on-screen menu

later in this manual.

BAND Buttons 4K

Press the BAND button to toggle between AM and FM reception.

An indicator in the front-panel display conﬁrms your choice and the

currently tuned station frequency is shown.

TUNING Buttons 0L

The TUNING buttons (CH +/- L on the remote control) provide three

different tuning functions, depending on the mode of operation.

In the normal FREQUENCY tuning mode, press a TUNING button

(CH+/- L on the remote) and release to manually jump to the

next station frequency, regardless of whether or not a station is

broadcasting on that frequency. For auto frequency search tuning,

press and hold the TUNING button for approximately one second. An

AUTO indicator will appear in the front-panel display and the tuner

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Comments to this Manuals

No comments

Rotel RSX-1562 Owner's Manual Page 43

Comments to this Manuals

Related products and manuals for AV receivers Rotel RSX-1562