Rotel RSX-1562 Owner's Manual download pdf (Page 25)

English

connect one of the OPTICAL OUT or COAXIAL OUT connections to the

digital input of the recorder.

No video connections are required for an audio recording device.

Connecting USB Audio/iPod/iPhone

See Figure 11

Connect the iPod/iPhone or MP3 player to the front USB socket. Select

tracks to be played from the iPod/iPhone the Rotel receiver will decode

the signal and play the music.

Zone Outputs (ZONE 2,3,4)

This Rotel receiver has connections for three independent remote

zones.

For audio connections to a remote zone, connect the left and

right ZONE 2,3, or 4 jacks to the left and right channels of a remote

zone ampliﬁer with an RCA audio cable.

For video connections to a remote zone, connect the ZONE 2,3,

or 4 VIDEO OUT jacks to the input of a TV in the remote zone using a

Composite Video cable.

For control of the unit from a remote zone: connect a remote

zone IR repeater to the ZONE 2, ZONE 3, or ZONE 4 REM IN jack

using a cable terminated with 3.5mm plugs.

Operating the RSX-1562

Considering its large number of features, settings and options, this Rotel

RSX-1562 is remarkably easy to operate. The key to operating the unit

is its system of On-Screen Displays (OSD) which guide you through

various choices.

To guide you through the operation of the unit, this section of the manual

starts with explaining the basic layout and function of the front panel and

the remote control. Then, we explain the basic operations such as turning

the unit on and off, adjust volume, selecting a source for listening, etc.

Following that is a detailed explanation of surround sound modes and

how to conﬁgure the unit for various types of recordings. Finally, there

are instructions for additional features and zone operation. All of these

are features that may be used in normal operation. The last section of

the manual (Conﬁguration) details options that may be selected during

initial setup and conﬁguration of the unit, many of which will be set once

and left untouched.

Throughout this manual, numbers in square boxes refer to the main unit

illustration at the front of this manual. Letters refer to the remote handset

illustration. When both appear, the function is found on both the unit’s

front panel and on the remote. When only one appears, that function is

found either only on the main unit, or only on the remote.

Front Panel Overview

The following is a brief overview of the controls and features on the front

panel of the unit. Details concerning the use of these controls are provided

in subsequent sections of this manual describing various tasks.

Front Panel Display 3

The FL Display on the front panel shows the source selected and type of

audio mode the unit is in.

Remote Sensor 3

This sensor receives IR signals from the remote control. Do not block this

sensor. The IR sensor is behind the front panel display.

Note: The remainder of the buttons and controls on the front panel are

described in the Overview of Buttons and Controls section.

Remote Control Overview

The RSX-1562 is supplied with an easy to use remote control RR-CX94.

The unit can be set to IR code 1 or IR code 2 in case the unit is conﬂicting

with other Rotel remote codes. Push the TUN key and 1(2) at the same

time sets the remote control into IR code 1(2). Point the remote to the

RSX-1562 and press 1(2) for 5 seconds sets the RSX-1562 in IR code

1(2) . The factory default is IR code 1.

The supplied remote can also be set to control zones 2,3 and 4 from

the main room by setting the remote to IR codes 3, 4 or 5. Set to IR

code 3, 4, or 5 by pressing TUN key and 3 (4 or 5) at the same time.

IR code 3 is for Zone 2. IR code 4 is for Zone 3 and IR code 5 is for

Zone 4 operation.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 50 51

Comments to this Manuals

No comments

Rotel RSX-1562 Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for AV receivers Rotel RSX-1562