Rotel RDV-1092 Owner's Manual download pdf (Page 3)

English

Important Safety Instructions

WARNING: There are no user serviceable parts inside. Refer all servic-

ing to qualiﬁed service personnel.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose

the unit to moisture or water. Do not expose the unit to dripping or splash-

ing. Do not place objects ﬁlled with liquids, such as vases, on the unit. Do

not allow foreign objects to get into the enclosure. If the unit is exposed

to moisture, or a foreign object gets into the enclosure, immediately dis-

connect the power cord from the wall. Take the unit to a qualiﬁed service

person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the

product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of unobstructed

clearance around the unit. Do not place the unit on a bed, sofa, rug,

or similar surface that could block the ventilation openings. If the unit is

placed in a bookcase or cabinet, there must be ventilation of the cabinet

to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any

other appliance that produces heat.

The unit must be connected to a power supply only of the type and volt-

age speciﬁed on the rear panel: AC 110-240 V, 50/60 Hz.

Connect the component to the power outlet only with the supplied power

supply cable or an exact equivalent. Do not modify the supplied cable. A

polarized plug has two blades, with one wider than the other. A grounding

plug has two blades plus a third grounding prong. These are provided for

your safety. Do not defeat grounding and/or polarization safety provisions.

If the supplied plug does not ﬁt your outlet, please consult an electrician

for replacement of the obsolete outlet. Do not use extension cords.

The main plug of the power cordset is a disconnect device of the appa-

ratus. In order to completely disconnect the apparatus from the supply

mains, the main plug of the power cordset should be unplugged from the

mains (AC) outlet. The stand-by LED indicator will not be lit up to show

the power cord is unplugged.

Do not route the power cord where it will be crushed, pinched, bent, ex-

posed to heat, or damaged in any way. Pay particular attention to the

power cord at the plug and where the cord exits the back of the unit.

The power cord should be unplugged from the wall outlet during a lightning

storm or if the unit is to be left unused for a long period of time.

Use only accessories speciﬁed by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf system recommended

by Rotel. Use caution when moving the unit in a stand or rack to avoid

injury from a tip-over.

Immediately stop using the component and have it inspected and/or ser-

viced by a qualiﬁed service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Notice

The COMPUTER I/O connection should be handled by authorized

person only.

FCC Information

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in ac-

cordance with the instruction, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a par-

ticular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the inter-

ference by one or more of the following measures:

• Reorient or relocate the receiving antenna.(TV, radio, etc.)

• Increase the separation between the equipment and receiver

• Connect the equipment to an outlet on circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for addi-

tional help.

Caution

This device complies with part 15 of the FCC Rules operation is subject to

the following to conditions: (1) This device may not cause harmful interfer-

ence, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

1 2 3 4 5 6 7 8 ... 82 83

Comments to this Manuals

No comments

Rotel RDV-1092 Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for DVD players Rotel RDV-1092