Rotel RSX-1560 Owner's Manual download pdf (Page 51)

50 51

English

RSX-1560 Surround Sound Receiver

50 51

English

RSX-1560 Surround Sound Receiver

2. Enter the four digits of the old password by pressing the +/– buttons

to select the ﬁrst letter of the new password, then pressing ENTER

to move to the second character. Repeat until the old password is

entered. Successful entry of the old password will jump to the ENTER

NEW PASSWORD line.

3. Enter the four digits of the new password by pressing the +/– buttons

to select the ﬁrst letter of the new password, then pressing ENTER

to move to the second character. Repeat until the new password is

entered.

4. You will be asked to re-enter the password again on the CONFIRM

PASSWORD line, following the same procedure. Once the password

is successfully conﬁrmed, it will be saved and you will return to the

DEFAULT SETUP MENU automatically.

5 To exit the PASSWORD screen without changing the password,

highlight the DEFAULT SETUP MENU line and press ENTER to return

to the previous screen.

Note: The factory password is 0000. A default password that will

always be recognized is 8888.

MORE INFORMATION

Troubleshooting

The unit does not turn on.

• Make sure the power cord is plugged into the rear panel and a live

AC outlet.

• Make sure the rear panel POWER switch is in the ON position.

No sound from any input.

• Make sure that MUTING is off and VOLUME is turned up.

• Make sure that preamp outputs are connected to a power ampliﬁer

and that the ampliﬁer is turned on.

• Make sure source inputs are connected and conﬁgured correctly.

• Check that the setting for HDMI AUDIO in the VIDEO/HDMI on-

screen menu is AMP MODE.

No sound from digital sources.

• Make sure that digital input connector is assigned to the proper

source input and that the source input is conﬁgured to use the digital

input rather than an analog input.

• Check the conﬁguration of the DVD player to ensure that the

bitstream and/or DTS digital output is activated.

No sound from some speakers.

• Check all power amp and speaker connections.

• Check Speaker Conﬁguration settings in the Setup menus.

No video output on TV monitor.

• Make sure that the TV monitor is connected properly and check the

input assignments. S-Video and Composite Video TV monitors can

only be used with interlaced SD sources. HDMI and Component

TV monitors can be used with Standard Deﬁnition (SD) and High

Deﬁnition (HD) sources. An HDMI 1080p source can only be sent to

a 1080p-compliant TV monitor.

• Component Video output at 720p or 1080i may not be available if

the source signal includes HDCP copy protection.

• HDMI cables must be 5 meters or less in length.

OSD menus are not displayed on TV Monitor.

• In some PAL systems, the menus may not be displayed unless there is

an active video signal.

Video and Audio do not match.

RSX-1560 English v2.indd 51 29/9/08 15:16:21

1 2 ... 46 47 48 49 50 51 52 53 54

Comments to this Manuals

No comments

Rotel RSX-1560 Owner's Manual Page 51

Comments to this Manuals

Related products and manuals for AV receivers Rotel RSX-1560