Rotel RSX-1560 Owner's Manual download pdf (Page 49)

48 49

English

RSX-1560 Surround Sound Receiver

48 49

English

RSX-1560 Surround Sound Receiver

from affecting any other zone in any way, even when the receiver is in

zone mode following a change to a zone.

The discrete option does not affect the control of the zones from the front

panel buttons in any way.

Note: The DISCRETE function is not available on all models and

is dependent on the software version installed. The DISCRETE

function is intended for use by a Rotel dealer or installer only.

Rotel’s use of discrete IR commands in multi-zone models provides easier

integration with IR control systems, making control possible from a single

IR input. For Rotel dealers or installers, further information is available on

the Rotel website: www.rotel.com

Go to ‘Support’ for downloads and technical updates, or seach for

‘discrete’ to ﬁnd relevant items. Remote commands are available in

Philips Pronto CCF format and in RTI CML format at:

www.rotel.com/downloads/prontocodes.htm

www.rotel.com/downloads/rticodes.htm

Change settings on the OTHER OPTIONS menu by highlighting the

desired line using the UP/DOWN buttons and using the +/– buttons to

step through the available settings. To return to the MAIN menu, press

the ENTER button. Press the MENU/OSD button on the remote to cancel

the display and return to normal operation.

Video/HDMI Setup



















The VIDEO/HDMI menu deals with the conﬁguration of the HDMI and

Component output for high-deﬁnition video display devices. See the

Video Inputs & Outputs section of this manual.

VIDEO OUT FORMAT: Speciﬁes the video resolution and format of

the video output at the TV MONITOR outputs. The receiver will scale all

video inputs up to this speciﬁed resolution for a perfect match with the

native resolution of your HDTV monitor. Can be 480p/576p, 720p,

1080i, 1080p.

HDMI AUDIO MODE: options are AMP MODE and TV MODE. In

AMP MODE the HDMI Audio and other audio (analog or digital) inputs

are processed and ampliﬁed by the receiver for output to the connected

speakers. TV MODE (pass-through) provides HDMI Audio and other

audio (analog or digital) outputs for use with an audio-capable display

device. In TV MODE, there is no output from the receiver’s speaker

terrminals.

Zone 2–4 Setup





















The ZONE SETUP menu provides settings and conﬁguration options

related to the operation of the remote zones. This menu is reached by

highlighting the ZONE line on the MAIN menu and pressing ENTER.

ZONE: Speciﬁes the zone to conﬁgure, ZONE 2, 3, or 4. Each zone is

conﬁgured individually.

SOURCE: Speciﬁes a source for listening in the selected zone. Options

are CD, TUNER, TAPE, VIDEO 1–5, SOURCE, and OFF. Selecting the

SOURCE option links the zone source to the source selected for the main

zone so that the remote zone will hear the same source as the main

zone. Selecting the OFF option turns the zone off.

VIDEO INPUT: Speciﬁes a video source (Composite Video only) for the

selected zone. The options available are Composite 1, 2 and 3 and OFF.

(If SOURCE, above, is set to OFF, the VIDEO INPUT selection will not be

available.)

VOLUME SETUP: conﬁgures the remote zone outputs for VARIABLE or

FIXED volume levels. VARIABLE allows control of the volume settings in

the remote zone from the receiver’s front panel or from a remote control/

IR repeater in the zone. FIXED output disables the volume control. In this

mode, the remote zone level can be ﬁxed at the level speciﬁed on the

next line, thus optimizing system performance when sending a ﬁxed level

signal to a preamp or ampliﬁer with its own volume adjustment.

VOLUME: In VARIABLE output mode, this line shows the current volume

setting for remote zone. In FIXED output mode, this volume setting

establishes a permanent ﬁxed output level for the remote zone.

Move the highlight to the desired line using the UP/DOWN buttons and

use the +/– buttons to adjust the volume level. To return to the MAIN

menu, press the ENTER button. Press the MENU/OSD button on the

remote to cancel the display and return to normal operation.

TURN ON VOL: Speciﬁes a default volume level to be used each time

the remote zone is activated. You can select LAST to have the zone

activate with the last previously used volume setting. Or, you specify a

volume from MIN (full mute) to MAX, in 1dB increments. Note that this

setting cannot exceed the MAX VOL established in the next line of the

menu.

MAX VOL: Speciﬁes the maximum volume level for the remote zone. The

volume cannot be adjusted above this level. Settings range from MIN to

MAX, in 1dB increments.

12V TRIGGER: The receiver has six 12V trigger outputs (labeled 1–6)

that supply a 12V DC signal to turn on Rotel components and other

components as needed. This menu item turns on speciﬁc 12V trigger

outputs whenever the indicated zone is activated. The six 12V Trigger

RSX-1560 English v2.indd 49 29/9/08 15:16:20

1 2 ... 44 45 46 47 48 49 50 51 52 53 54

Comments to this Manuals

No comments

Rotel RSX-1560 Owner's Manual Page 49

Comments to this Manuals

Related products and manuals for AV receivers Rotel RSX-1560