Rotel RSX-1560 Owner's Manual download pdf (Page 22)

22 23

English

RSX-1560 Surround Sound Receiver

22 23

English

RSX-1560 Surround Sound Receiver

MAKING CONNECTIONS

CD Player o

�

See Figure 10

Connect the digital output of the CD player to any of the Optical or Coax

digital inputs on the receiver. Use the INPUT SETUP menu to assign the

digital input to the CD (the default is COAXIAL 2).

Optional: Connect the left and right analog outputs from the CD player

to the AUDIO IN jacks labeled CD (left and right). This option uses the

CD player’s D/A converters; however, this may result in an extra A/D

and D/A conversion step.

There are typically no video connections for a CD Player and no video

input is assigned to the CD, as a default setting.

DVD or Blu-ray Player iolcb

See Figures 4 & 6

DVD or Blu-ray player connections can be made using HDMI,

Component Video, S-Video, or Composite video connections.

Note: You must use either HDMI or Component Video connections

for a progressive scan or high deﬁnition player. You must make

a Composite Video or S-Video connection if you want to use the

DVD’s signal in one of the three remote zones.

For HDMI connections: Connect an HDMI cable from the output of the

DVD player to one of the HDMI IN 1–4 inputs on the receiver.

For Component Video connections: Connect a set of three

Component Video cables from the output of the DVD player to one of the

COMPONENT VIDEO 1–3 inputs on the receiver. Make sure to connect

the Y output to the Y input, the PB output to the PB input, and the PR

output to the PR input.

For S-Video connections: Connect an S-VIDEO cable from the output

of the DVD player to one of the S-VIDEO IN 1–3 inputs on the receiver.

For Composite Video connections: Connect an RCA-RCA video

cable from the output of the DVD player to one of the COMPOSITE IN

1–3 inputs on the receiver.

Note: Use the INPUT SETUP screen to assign the video input you

have used to the DVD source.

Digital audio connection: Connect the digital output of the DVD

player to any one of the DIGITAL IN OPTICAL 1–4 or DIGITAL IN

COAXIAL 1–3 inputs on the receiver. An HDMI cable carries both digital

video and digital audio signals; therefore, no separate digital audio

connection needs to be made.

Note: Use the INPUT SETUP screen to assign the digital input to

the same video input source used above.

Optional analog audio connection: If you want to record the audio

signal from the DVD player, connect the left and right analog outputs

from the DVD player to one pair of VIDEO IN 1–5 audio input jacks.

Make sure that you connect the right channel to the R input jack and the

left channel to the L input jack.

Cable, Satellite, or HDTV Tuner iolcb

See Figure 8

TV tuner connections can be made using HDMI, Component Video, S-

Video, or Composite video connections.

Note: You must use either HDMI or Component Video connections

for high deﬁnition tuner, satellite, or cable receiver. You must make

a Composite Video connection if you want to use the signal in one

of the three remote zones.

For HDMI connections: Connect an HDMI cable from the output of the

TV tuner to one of the HDMI IN 1–4 inputs on the receiver.

For Component Video connections: Connect a set of three

Component Video cables from the output of the TV tuner to one of the

COMPONENT VIDEO 1–3 inputs on the receiver. Make sure to connect

the Y output to the Y input, the PB output to the PB input, and the PR

output to the PR input.

For S-Video connections: Connect an S-VIDEO cable from the output

of the TV tuner to one of the S-VIDEO IN 1–3 inputs on the receiver.

For Composite Video connections: Connect an RCA-RCA video

cable from the output of the TV tuner to one of the COMPOSITE IN 1–3

inputs on the receiver.

Note: Use the INPUT SETUP screen to assign the video input you

have used to the TV Tuner source.

Digital audio connection: Connect the digital output of the TV tuner

to any one of the DIGITAL IN OPTICAL 1–4 or DIGITAL IN COAXIAL 1–3

inputs on the receiver. An HDMI cable carries both digital video and

digital audio signals; therefore, no separate digital audio connection

needs to be made.

Note: Use the INPUT SETUP screen to assign the digital input to

the same video input source used above.

Optional analog audio connection: If you want to record the audio

signal from the TV tuner, connect the left and right analog outputs from

the TV tuner to one pair of VIDEO IN 1–5 audio input jacks. Make sure

that you connect the right channel to the R input jack and the left channel

to the L input jack.

Audio Recorder o[x

See Figure 11

Connect the left and right analog outputs from an audio tape deck to the

TAPE IN jacks (left and right).

Connect the left/right TAPE OUT jacks to the inputs on the audio tape

deck.

Optional: For a digital recording device, connect the digital output of

the recorder to one of the OPTICAL IN or COAXIAL IN digital inputs on

the receiver. Use the INPUT SETUP screen to assign that digital input to

the TAPE source. If the recording device accepts a digital recording input,

RSX-1560 English v2.indd 22 29/9/08 15:15:58

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 53 54

Comments to this Manuals

No comments

Rotel RSX-1560 Owner's Manual Page 22

Comments to this Manuals

Related products and manuals for AV receivers Rotel RSX-1560