Rotel RDV-1045 Owner's Manual download pdf (Page 11)

English

Disc Care and Handling

Proper handling and storage of discs is very

important. If a disc gets dirty, dusty, scratched

or warped, playback, sound and picture will

be adversely affected.

Handling

• To avoid damage do not touch the surface

of the disc.

• Do not apply labels or use any adhesive on

either the label side or playback side.

Storing discs

• Keep discs in their cases. If discs are piled

on top of one another without their protective

cases, they can be damaged.

• Do not put discs where they may be exposed

to direct sunlight, or high temperatures or

humidity. Avoid leaving discs in a car!

Cleaning discs

• Wipe with a soft dry cloth, moving from the

center outwards. If a disc is difﬁcult to clean,

wipe with a cloth moistened with water.

• Never use record cleaners, petrol, alcohol

or any anti-static agents.

DVD Video Disc Region Codes

All DVD players and DVD discs have a Region

Code number. This unit only can play back DVD

discs whose Region Code numbers include the

unit’s Region Code, which is indicated on the

region code symbol on the rear panel.

Examples of playable DVD discs for a unit with

Region Code “1”

NOTE: With some DVD and Video CD discs,

you may not be able to control them according

to the instructions described in this manual,

because of the contents of the disc.

If a DVD VIDEO with an improper Region

Code number is loaded, “REGION CODE ER

ROR!” appears on the TV screen and playback

cannot start.

Initial Setup

Turning On the RDV-1045

When the RDV-1045 is connected to a power

outlet the STANDBY indicator

on the front

panel is always on. Press the STANDBY

button on the front panel, or the POWER but

ton

on the remote, to turn the unit

on and light the display

Turn On Messages

One of the following messages may appear in

the display when the RDV-1045 is turned on:

NOW READING – Appears when the DVD

player is reading the disc information. Do

not try to operate the unit until this message

goes away.

REGION CODE ERROR! – Appears when the

Region Code of a DVD that has been loaded

is not supported by the player.

NO DISC – Appears when no disc is load

ed.

OPEN – Appears when the disc tray is open-

ing.

CLOSE – Appears when the disc tray is

closing.

CANNOT PLAY THIS DISC – Appears when

you try to play an unplayable disc.

Setting the Output Signal Type

With the RDV-1045 and the TV turned on, press

the P.SCAN button

on the remote. The The

current video signal type will ﬂash.

If necessary, press the

t/u buttons

to select the video signal type suitable for the

TV. Then press ENTER

. The selected video

signal type is displayed for a short time.

About Output Signals

NTSC is the correct choice for TVs in North

America. PAL TVs are used through most of

the rest of the world.

With either NTSC or PAL TV’s you can select

INTERLACE (“NTSC” or “PAL”) or PROGRES

SIVE (“NTSC PROG” or “PAL PROG”). Picture

quality is better with the “PROGRESSIVE”

mode. But only newer, high performance TVs

can accept progressive signals. A progressive

signal is only available from the Component

Output Connectors

so the TV must have

component inputs.

If you are unsure about which setting to use,

contact your authorized Rotel dealer.

Output Signal Notes

• The picture may be distorted for a period

of time after you press ENTER button. This

is not a malfunction of the system.

• Some progressive signal and high-deﬁnition

TVs are not fully compatible with this unit.

This will result in an unnatural picture when

playing a DVD VIDEO with progressive scan

ning. In this case, change the scan mode to

INTERLACE.

• Even if the power cord of the DVD player

is disconnected from the AC outlet or the

power is interrupted, the video signal type

setting is stored.

Selecting Preferences

See the “Selecting Preferences” of this manual

for information on changing the preferred setting

for such things as menu languages, video picture

options, audio options and other features.

Changing the Display Window

Brightness

To change the brightness of the display window

press the DIMMER button

of the remote

control. Each time you press DIMMER, the

brightness of the display changes in the order

shown.









If “DIMMER AUTO” is selected, the setting

automatically changes to “DIMMER 2” when

a video disc is played. The display goes back

to the “DIMMER AUTO” setting when play is

stopped.

If “DIMMER AUTO” is selected, the setting

automatically changes to “DIMMER OFF” while

a non-video disc is being played. The display

goes back to the “DIMMER AUTO” setting when

play is stopped.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Comments to this Manuals

No comments

Rotel RDV-1045 Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for DVD players Rotel RDV-1045