Rotel RCD-991 User Manual download pdf (Page 7)

RCD-991

Operation

The RCD-991 can be operated using its front panel buttons or

from corresponding buttons on the supplied infrared remote con-

trol. Specific instructions for each of these controls are detailed

below. Some of the buttons are duplicated on the front panel

and

on the IR remote control. However, there are many instances

where the buttons are only available on one or the other. These

are noted in the following instructions.

Infrared Remote Control

Before using the IR remote control, it is necessary to install two

“AAA” batteries (supplied). Remove the plastic cover on the

back of the IR remote, install the batteries (observing the + and –

polarity indications), and reinstall the cover.

To use the IR remote control, aim it at the IR sensor located on

the front panel of the RCD-991.

Display

A lighted DISPLAY on the front panel of the RCD-991 provides

useful information about the status of the unit, activation of spe-

cial features, and track/time information for the disc being

played. Each of these indicators is described in the detailed op-

erating instructions that follow.

REMAIN

PROGRAM REPEAT 1 ALL

MIN SEC

RANDOM

OVER

INTRO

1234

5678

9 101112

13 14 15 16

Disc drawer

A motor-driven disc drawer, located in the center of the RCD-991,

slides out to accept a compact disc and retracts to play the disc.

Place the compact disc in the drawer label-side up. Make sure

the disc is properly centered in the tray.

The drawer can be closed in two ways: pushing the

OPEN button or pushing the PLAY button.

Transport Control Buttons

These buttons provide basic control functions for the disc trans-

port mechanism. Except where noted, all functions are available

on the RCD-991 front panel and the IR remote control. The circled

numbers provide a convenient reference for finding the button

on the illustrations of the RCD-991 and the IR remote control at

the front of this manual.

OPEN Button

When the transport disc drawer is closed, pressing this but-

ton automatically opens the drawer. To close the drawer,

press this button again. The drawer can also be closed by

pressing the PLAY button.

When the drawer is open, the DISPLAY will read “OPEN”.

When it is closed with no disc, the display will read “NO

DISC”. When the drawer closes with a disc inserted, the DIS-

PLAY will indicate the number of tracks on the disc and the

total time of the disc in minutes and seconds.

PLAY Button

Press the PLAY button to start playing the disc. If the disc

drawer is open, it will close automatically. The number of the

track being played and the time remaining will be shown in

the display, along with the PLAY indicator.

Normally, the disc will start playing with the first track. How-

ever, you can select a different track using the TRACK but-

tons or the DIRECT ACCESS buttons (see below) before

pressing the PLAY button to start playing a different track.

PAUSE Button

This button is used to temporarily suspend play. The disc

continues to spin and play will be resumed from the current

position. The PAUSE indicator will light in the DISPLAY.

To resume playing the disc, press the PAUSE button again or

press the PLAY button.

STOP Button

This button stops a disc that is playing and resets the player,

i.e. if play is resumed, the disc will start over from the first

track. Pressing the STOP button twice cancels any pro-

grammed selections (see below).

TRACK Buttons

These buttons are used to select tracks on the disc. When a

disc is playing, pressing the right TRACK button advances to

the beginning of the next track. Pressing the left TRACK but-

ton returns to the beginning of the current track. Pressing

twice quickly in succession returns to the beginning of the

previous track. The new track number appears in the DIS-

PLAY.

These buttons are also used to select a track before pressing

the PLAY button or when memorizing tracks for the PRO-

GRAM play mode (see below). These selections are made by

continuously pressing the TRACK buttons until the desired

track is reached.

In PROGRAM mode, the TRACK buttons advance or reverse

to the next track in the memorized selection list.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Rotel RCD-991 User Manual Page 7

Comments to this Manuals

Related products and manuals for CD players Rotel RCD-991