Rotel RC-1070 Owner's Manual download pdf (Page 14)

RC-1070 Stereo Control Ampliﬁer

No Sound

Be sure the RC-1070 is turned on. The VOL-

UME control indicator light and the selected

function indicator should be lit. Be sure the

LISTENING selector is set to the proper input.

Check to see if wthe MUTE function has been

engaged. Check the signal source to see if it

is functioning properly. Make sure the cables

from the signal source to the RC-1070 inputs

are connected properly. Check the power

ampliﬁer for power and proper operation.

Check all the wiring between the RC-1070,

the power ampliﬁer, and the speakers.

Speciﬁcations

Total Harmonic Distortion (20 Hz-20 kHz)

< 0.006%

Intermodulation Distortion

< 0.006% at 1V output (60 Hz:7 kHz, 4:1)

Input Sensitivity/Impedance

Line Level: 150 mV/24 kOhms

Phono (MM): 1.2mV/68k ohms

Output Level/Impedance

1V/100 Ohms

Usable Headphone Impedance

8 – 2,000 Ohms

Frequency Response

Line Level: 4Hz – 100kHz, +0, -3dB

Phono: 20Hz – 20kHz, ±0.5dB

Signal to Noise Ratio (IHF “A” weighted)

Line Level: 95 dB

Phono: 70 dB

Phono Overload:

70mV

Power Requirements

USA: 115 Volts, 60 Hz

CE: 230 Volt, 50 Hz

Power Consumption

10 Watts

Dimensions (W x H x D)

430 x 92 x 344 mm

17” x 3

5/8” x 135/8”

Weight (net)

5.4 kg, 11.9 lbs.

All speciﬁcations are accurate at the time of print-

ing.

Rotel reserves the right to make improvements

without notice.

Rotel and the Rotel HiFi logo are registered trade

marks of The Rotel Co, Ltd., Tokyo, Japan.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments

Rotel RC-1070 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Supplementary music equipment Rotel RC-1070