Rotel RSP-985 User Manual download pdf (Page 26)

SURROUND SOUND PROCESSOR RSP-985

RSP-985 Specifications

Audio

Total Harmonic Distortion (10 Hz - 70 kHz): <0.03%

Intermodulation Distortion (60 Hz: 7 kHz): <0.03%

Frequency Response (line level): 20 Hz - 20 kHz, ± 1 dB

Signal to Noise Ratio (IHF “A” weighted): 100 dB (Stereo)

90 dB (Dolby Digital, dts)

Gain/Input Impedance

Analog Gain: 10dB/47 kohms

Digital: 0.5V/-20dBf

Tone Controls (Bass/Treble): ±6 dB at 50 Hz/15 kHz

Video

Frequency Response: 3 Hz-10 MHz, ± 3 dB

Signal to Noise Ratio: 45 dB

Input Impedance: 75 ohms

Output Impedance: 75 ohms

Output Level: 1 volt

General

Power Consumption: 46 watts

Power Requirements (AC): 115 volts, 60Hz (USA version)

230 volts, 50Hz (Europe version)

Weight: 7.0 Kg/15.4 lb.

Dimensions (W x H x D): 440 x 121 x 329 mm

173/8" x 47/8" x 13"

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice.

Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.

DTS is a registered trademark of Digital Theater Systems.

Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby”, “Pro Logic”, and

the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Confidential unpub-

THX Ultra™ and the THX Ultra logo are registered trademarks of Lucasfilms, Ltd.

Factory Default Menu

Reset to factory

default settings?

YES = ENTER

NO = BACK

The final menu that can be reached from the SYSTEM SETUP

screen is the FACTORY DEFAULT menu, which resets all system

configuration settings to the factory supplied settings.

Note: Resetting to factory default settings will erase all stored set-

tings including delay settings, speaker settings, balance settings,

input settings and more. You will lose ALL system configuration

settings. Be certain that you wish to do so before resetting the

factory defaults.

To reset the factory defaults, press the ENTER button. This will

take you to a confirmation screen where you will have a chance

to confirm your decision by pressing ENTER a second time.

To return to the SYSTEM SETUP screen without resetting the fac-

tory defaults, press the BACK button.

1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Rotel RSP-985 User Manual Page 26

Comments to this Manuals

Related products and manuals for Receiver Rotel RSP-985