Rotel RDV-1093 Owner's Manual download pdf (Page 12)

RDV-1093 DVD Audio/Video Player

Standard deﬁnition TV monitors should be con-

nected with one of three types of video output

connections – RCA composite video, S-Video, or

Component Video. On standard televisions, the

S-Video output provides better picture quality

than the composite video output.

NOTE: In most systems, only one video

connection should be made.

HDTV Connections

Connect the RDV-1093 to a high deﬁnition

TV monitor with HDMI, DVI, or Component

Video inputs. The video resolution can be set

to match the native resolution of the TV monitor

at 480p/576p, 720p, 1080i, or 1080p.

NOTE: Most DVD discs feature Macrovision

and/or HDCP copy protection which may

not display properly at resolutions of 720p

or higher.

When using Component

Video connections, set the

RDV-1093 output resolution to

480i/576i or 480p/576p. The HDMI

connections are not affected by Macrovision

copy protection.

HDMI Digital Connection

See Figure 4

Use this type of connection with an HDTV that

displays digital signals directly, such as LCD,

Plasma, and DLP monitors.

Connect one end of an HDMI cable to the

VIDEO OUT HDMI connector on the back

of the RDV-1093. Connect the other end of

the cable to the HDMI input connector on the

back of the HDTV or video processor. We

recommend a maximum length of 5 meters

for HDMI cables.

NOTE: The RDV-1093 video output settings

should be configured to match the native

resolution of the HDTV. See the Video Setup

Menu topic in the Setup section.

DVI Digital Connection

See Figure 5

Use this type of connection with an HDTV that

displays digital signals directly, such as LCD,

Plasma, and DLP monitors.

Connect one end of an HDMI to DVI cable to

the VIDEO OUT HDMI connector on the back

of the RDV-1093. Connect the other end of the

cable to the DVI input connector on the back of

the HDTV. We recommend a maximum length

of 5 meters for DVI cables.

NOTE: The RDV-1093 video output settings

should be configured to match the native

resolution of the HDTV. See the Video Setup

Menu topic in the Setup section.

Component Video Connection

See Figure 6

Use this type of connection with an HDTV with

cathode ray tube technology, such as direct

view, rear projection, and front projection

monitors.

Three cables are required to make Component

Video Connections:

1. Connect one cable from the COMPONENT

VIDEO OUT connector labeled Y on the

RDV-1093 to the Y input on the TV or sur

round processor.

2. Connect a second cable from the COM

PONENT VIDEO OUT connector labeled

PB on the RDV-1093 to the PB input on the

TV or surround processor.

3. Connect a third cable from the COMPO

NENT VIDEO OUT connector labeled P

on the RDV-1093 to the P

R input on the TV

or surround processor.

NOTE: The RDV-1093 video output settings

should be configured to match the native

resolution of the HDTV.

To avoid Macro-

vision copy protection issues with

most DVD discs, set the output to

480i/576i or 480p/576p when us-

ing Component Video connections.

See the Video Setup Menu topic in the Setup

section.

SDTV Connections

When connecting a standard deﬁnition TV,

the best picture quality will be achieved using

Component Video or S-Video cables. If the TV

does not have either of these types of connec

tions, use a composite video connection.

Component Video Connection

See Figure 6

Three cables are required to make Component

Video Connections:

1. Connect one cable from the COMPONENT

VIDEO OUT connector labeled Y on the

RDV-1093 to the Y input on the TV or sur

round processor.

2. Connect a second cable from the COM

PONENT VIDEO OUT connector labeled

PB on the RDV-1093 to the PB input on the

TV or surround processor.

3. Connect a third cable from the COMPO

NENT VIDEO OUT connector labeled P

on the RDV-1093 to the P

R input on the TV

or surround processor.

NOTE: The RDV-1093 video output settings

should be configured to the interlaced

480i/576i setting with a standard definition

TV. See the Video Setup Menu topic in the

Setup section.

S-Video Connection

See Figure 7

Connect one end of an S-Video cable to the

VIDEO OUT S-VIDEO output on the back of

the RDV-1093. Connect the other end of the

cable to the S-VIDEO input on the TV or sur

round processor.

NOTE: The RDV-1093 outputs all S-Video

at 480i/576i.

Composite Video Connection

See Figure 7

Connect one end of an RCA video cable to the

VIDEO OUT COMPOSITE output on the back

of the RDV-1093. Connect the other end of the

cable to the Composite Video input on the TV

or surround processor.

NOTE: The RDV-1093 outputs all Compos-

ite Video at 480i/576i.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Comments to this Manuals

No comments

Rotel RDV-1093 Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for DVD players Rotel RDV-1093