Rotel RDV-1093 Owner's Manual download pdf (Page 27)

English

High Deﬁnition Setup Menu

DVD playback

system setup

video setup

high def. setup

audio setup

speaker setup

parental control

exit menu

output format

HDMI color space

enhancement

There are three user-adjustable items on the

High Deﬁnition Setup Menu which set video

options for DVD playback. Three more items

provide status information only and cannot

be changed.

Output Format

When using one of the high deﬁnition video

connections (Component Video or HDMI), the

RDV-1093 internal video scaler can output

video in a choice of resolutions to match your

TV monitor. Use this item to specify the video

resolution that best matches your high-deﬁni

tion. In almost all cases, you should match

this setting to the native resolution of your TV.

Video signals from all source components are

scaled up to the speciﬁed resolution.

NOTE: Most DVD discs feature Macrovision

and/or HDCP copy protection which may

not display properly at resolutions of 720p

or higher.

When using Component

Video connections, set the

RDV-1093 output resolution to in-

terlaced 480i/576i or progressive

480p/576p. The HDMI connections are

not affected by Macrovision copy protection.

• 720p: Progressive-scan high-def resolu

tion.

• 1080p: Progressive-scan high-def resolu

tion.

• 1080i:

Interlaced high-def resolution.

• PROGRESSIVE: 480p (NTSC) or 576p

(PAL) progressive-scan resolution (default

setting).

• INTERLACED: 480i (NTSC) or 576i (PAL)

interlaced resolution. Use this setting with

a standard definition TV.

• AUTO: Outputs video at 720p, suitable

for use with most HDMI monitors.

HDMI Color Format

There are three different color space standards

for digital TV monitors: RGB, YCrCb 4:2:2,

and YCrCb 4:4:4. Matching the output of the

RDV-1093 to color format is essential when

connecting the monitor with HDMI cables. Typi

cally, the AUTO setting will detect the proper

format for the digital TV monitor automatically.

If not, use one of the manual settings:

• AUTO: The DVD player detect information

from the TV Monitor and selects the correct

color space automatically. (default)

• RGB: Use when your HDMI connected

digital TV monitor supports the RGB color

format.

• YCrCb 4:2:2: Use when your HDMI con

nected digital TV monitor supports YCrCb

4:2:2 color.

• YCrCb 4:4:4: Use when your HDMI con

nected digital TV monitor supports YCrCb

4:4:4 color.

Enhancement

The built-in video scaler has optional edge

enhancement to increase the sharpness of the

picture at the expense of somewhat higher

video noise. This setting allows you the choice

of using edge enhancement with softer video

images.

• OFF: Turns off edge enhancement (de

fault).

• LOW: Turns on edge enhancement, with

minimal settings.

• MEDIUM: Turns on edge enhancement,

with moderate settings.

• HIGH: Turns on maximum edge enhance

ment.

MORE INFORMATION

Troubleshooting

If you are experiencing difﬁculties, consult the

following list for possible solutions:

Power

Power does not come on.

• Check that the power plug is inserted

securely.

Operation

Region Code Error.

• Make sure the Region Code of the inserted

disc matches the code shown on the back

of the unit.

Unit will not work or operates er

ratically.

• Microprocessor malfunction due to lightning

or static electricity. Turn off the power and

unplug the power cord. Connect the power

cord again.

• Moisture condensation caused by a sudden

change of temperature or humidity. Turn

off the power, then turn it on a few hours

later.

• If only one specific disc will not play, the

disc may be defective.

Remote does not work.

• Check the battery installation, install new

batteries, aim remote at unit.

1 2 ... 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments

Rotel RDV-1093 Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for DVD players Rotel RDV-1093