Rotel RA-1070 Owner's Manual download pdf (Page 2)

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT. INSERT FULLY.

APPLICABLE FOR USA, CANADA OR WHERE

APPROVED FOR THE USAGE

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU AU FOND.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: There are no user serviceable parts inside. Re-

fer all servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do

not expose the unit to moisture or water. Do not allow for-

eign objects to get into the enclosure. If the unit is exposed

to moisture, or a foreign object gets into the enclosure, im-

mediately disconnect the power cord from the wall. Take

the unit to a qualified service person for inspection and nec-

essary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the

product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance around the

unit. Do not place the unit on a bed, sofa, rug, or similar surface that could

block the ventilation slots. If the component is placed in a bookcase or

cabinet, there must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any

other appliance that produces heat.

The unit must be connected to a power supply only of the type and volt-

age specified on the rear panel of the unit.

Connect the component to the power outlet only with the supplied power

supply cable or an exact equivalent. Do not modify the supplied cable in

any way. Do not attempt to defeat grounding and/or polarization provi-

sions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at

severe angles, exposed to heat, or damaged in any way. Pay particular

attention to the power cord at the plug and where it exits the back of the

unit.

The power cord should be unplugged from the wall outlet if the unit is to

be left unused for a long period of time.

Immediately stop using the component and have it inspected and/or ser-

viced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough

to support its weight. Do not place it on a moveable

cart that could tip over.

RA-1070 Stereo Integrated Amplifier

1 2 3 4 5 6 7 ... 49 50

Comments to this Manuals

No comments

Rotel RA-1070 Owner's Manual Page 2

Comments to this Manuals

Related products and manuals for Audio amplifiers Rotel RA-1070