Rotel RSP-966 Owner's Manual download pdf (Page 2)

SURROUND SOUND PROCESSOR RSP-966

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT. INSERT FULLY.

APPLICABLE FOR USA, CANADA OR WHERE

APPROVED FOR THE USAGE

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU AU FOND.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is to alert the user to the

presence of uninsulated dangerous

voltages inside the product's enclosure

that may constitute a risk of electric shock.

This symbol is to alert the user to important

operating and maintenance (service)

instructions in this manual and literature

accompanying the product.

WARNING:

There are no user serviceable parts inside. Refer all servicing to qualified ser-

vice personnel.

WARNING:

To reduce the risk of fire or electric shock, do not expose the unit to moisture

or water. Do not allow foreign objects to get into the enclosure. If the unit is

exposed to moisture, or a foreign object gets into the enclosure, immediately

disconnect the power cord from the wall. Take the unit to a qualified service

person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component. Keep

this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the

product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance around the unit. Do

not place the unit on a bed, sofa, rug, or similar surface that could block the

ventilation openings. If the unit is placed in a bookcase or cabinet, there must

be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any other

appliance that produces heat.

The unit must be connected to a power supply only of the type and voltage

specified on the rear panel of the unit.

Connect the component to the power outlet only with the supplied power sup-

ply cable or an exact equivalent. Do not modify the supplied cable in any way.

Do not attempt to defeat grounding and/or polarization provisions. The cable

should be connected to a 2-pin polarized wall outlet, matching the wide blade

of the plug to the wide slot of the receptacle. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe

angles, exposed to heat, or damaged in any way. Pay particular attention to the

power cord at the plug and where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left

unused for a long period of time.

Immediately stop using the component and have it inspected and/or serviced

by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough

to support its weight. Do not place it on a moveable

cart that could tip over.

1 2 3 4 5 6 7 ... 23 24

Comments to this Manuals

No comments

Rotel RSP-966 Owner's Manual Page 2

Comments to this Manuals