Rotel RR-990 User Manual download pdf (Page 5)

Look at the Standard Edit screen and notice that

the Component Selectors at the bottom are all

blinking. The only item not blinking is the icon

associated with the component Control Panel you

are about to customize.

3. Touch any button you think you won’t need. It

will disappear and you’ll hear a double beep in

confirmation.

4. Made a mistake? Don’t worry - just press the

same point on the LCD touch screen again and

the button will reappear accompanied by a

single confirming beep.

5. Continue this process until you’ve constructed

the ideal Control Panel for the component

you’ve chosen. (Don’t worry about doing it per-

fectly the first time around. You can reenter

Edit mode and reconfigure the Control Panel

any time.)

6. When you’ve finished editing the Control

Panel, simply press the Component Selector

again. The RR-990 will beep three times to

confirm that it is leaving Edit mode and will

show your newly-customized Control Panel.

Congratulations, you did it!

A Shortcut With A Long Explanation

You can edit the SEL 1 and SEL 2 Control Panels

just as you would any other Control Panel (TV, VCR,

CD, etc.). However, SEL 1 and SEL 2 allow you to

quickly configure a Custom Control Panel based on

any of the RR-990’s other Control Panels.

This may be particularly useful if you’ve decided to

use SEL 1, for example, as the Control Panel for an-

other VCR. If this is the case, simply enter into Con-

trol Panel Edit mode for SEL 1 by following steps 1

and 2 above.

When you see the Component Selectors at the bot-

tom of the LCD panel blinking, simply touch the

Component Selector (CD, for example) whose Con-

trol Panel functions are most similar to the one you

need for SEL 1.

You’ll notice that SEL 1’s Control Panel changes im-

mediately into a duplicate of the Control Panel for

the Component Selector you’ve just touched.

Now, just delete unneeded buttons as shown in steps

3, 4, and 5 above until you’re satisfied with your new

creation. Then touch the SEL 1 Component Selec-

tor once again. You’ve just “locked in” your new Cus-

tom Control Panel and left Edit mode.

And it took far less time to do it than to read how,

didn’t it?

2 – INITIAL PROGRAMMING

Now that you’ve gotten to know your way around

the RR-990’s LCD screen, it’s time to get really ad-

venturous and put this knowledge to real use! After

all, this is the reason you bought the RR-990 in the

first place, isn’t it?

Here’s Why . . .

As it comes from the factory, the RR-990 is a lot like

a very precocious 3 year old: It’s got a lot of potential

but it doesn’t know very much. You need to send it to

school. However, in this case, you’re also its teacher.

The RR-990 contains no internal control codes. It is

truly a blank slate: You can point it at anything, press

all the buttons you want, and it will do . . . nothing.

It needs to be programmed first. You’re elected.

Here’s How . . .

1. Gather that confusing pile of remote control-

lers from your coffee table. Place them gently

near the RR-990. Make sure the area you’ve

chosen isn’t in direct sunlight or lighted by very

bright halogen lamps, etc. (The RR-990 learns

best in normal to slightly dim room lighting.)

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Rotel RR-990 User Manual Page 5

Comments to this Manuals

Related products and manuals for Unknown Rotel RR-990