Rotel RC-1082 User Manual download pdf (Page 9)

English

NOTE: By default, the RR-AT97 operates

the Rotel RT-1080/RT-961/RT-955 tuners.

The remote can be reprogrammed to oper-

ate the RT-940AX tuner. This programming

only needs to be done once:

To program for the RT-940AX:

press

the ON button and the 2 button simultane-

ously.

To program for the RT-1080/

RT-961/RT-955:

press the ON button

and the 1 button simultaneously.

Troubleshooting

Most difﬁculties in audio systems are the result

of incorrect connections, or improper control

settings. If you encounter problems, isolate the

area of the difﬁculty, check the control settings,

determine the cause of the fault and make the

necessary changes. If you are unable to get

sound from the RC-1082, refer to the sugges

tions for the following conditions:

Standby Power Indicator Is

Not Lit

The Standby Power Indicator should be lit

whenever the RC-1082 is plugged into the

wall power outlet. If it does not light, test the

power outlet with another electrical device,

such as a lamp. Be sure the power outlet be

ing used is not controlled by a switch that has

been turned off.

Fuse Replacement

If another electrical device works when plugged

into the power outlet, and the Standby Indicator

still will not light when the RC-1082 is plugged

into the wall outlet, it indicates that the internal

power fuse may have blown. If you believe this

has happened, contact your authorized Rotel

dealer to get the fuse replaced.

No Sound

Check the signal source to see if it is functioning

properly. Make sure the cables from the signal

source to the RC-1082 inputs are connected

properly. Be sure the Listening Selector is set

to the proper input. Check the power ampli

ﬁer for power and proper operation. Check

all the wiring between the RC-1082 and the

power amplifier, and the power amplifier

and speakers.

Speciﬁcations

Total Harmonic Distortion (20Hz-20kHz) < 0.004%

Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.004% at 1V output

Input Sensitivity / Impedance

Phono - MC 250 µV / 100 ohms

Phono - MM 2.5 mV / 47 kOhms

Line Level 150 mV / 220 kOhms

Phono Overload (MC/MM) 16 mV / 160 mV

Output Sensitivity / Impedance 1 V/ 100 Ohms

Frequency Response

Phono Input 20Hz-20kHz, ± 0.2dB

Line Level Input 4Hz-100kHz, ± 0.5dB

Signal to Noise Ratio (IHF “A” weighted)

Phono - MC/MM 70 dB/75 dB

Line Level 100 dB

Power Requirements

USA Version 120 Volts, 60 Hz

European Version 230 Volt, 50 Hz

Power Consumption 15 Watts

Standby Power Consumption 2.5 Watts

Dimensions (W x H x D) 432 x 92 x 344 mm

17 x 3

/8 x 13

/16”

Weight (net) 7.5 kg, 16.53 lbs.

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Comments to this Manuals

No comments

Rotel RC-1082 User Manual Page 9

Comments to this Manuals

Related products and manuals for Unknown Rotel RC-1082