Rotel RTC-965 Owner's Manual download pdf (Page 5)

English

To memorize a macro sequence:

Step One: Press a DEVICE button (AUD, SAT, or CBL only)

and the MUTE button simultaneously for at least one

second. The DEVICE button will light red for 20 seconds.

Step Two: Press the MACRO button you wish to program.

Step Three: Press a sequence of commands (up to 8) that

you wish to store. Pressing a DEVICE button to change

modes during the sequence counts as one command.

Step Four: Press the CH UP button to store the macro se-

quence. The DEVICE button will blink twice to confirm.

Note: Because the POWER button can be used as a

MACRO button, the normal Power On/Off commands are

temporarily stored on the MUTE button during the macro

learning sequence. To include a power on/off command

in a macro, simply press the MUTE button.

To erase a previously stored macro sequence, follow the

above steps, skipping Step 3 without entering any com-

mands, i.e. memorize a blank macro.

Volume Punch Through

It may be desirable to have the AUDIO or TV volume

commands available at all times. For example, when us-

ing the RR-939B to control your CD player, you might

want the VOLUME buttons (which would normally be in-

active in CD mode) to change the volume of your preamp

or surround sound processor. This feature, called Volume

Punch Through, can be used to make the volume com-

mands from either the AUDIO or TV device mode avail-

able in other device modes.

To set-up the Volume Punch Through feature:

Step One: Press the DEVICE button (the device you wish

to transfer the volume function to) and the MUTE button

simultaneously for at least one second.

Step Two: Press the VOLUME UP button.

Step Three: Press the AUDIO or TV DEVICE button (the

device you wish to transfer the volume function from).

The DEVICE button will blink twice to confirm.

RR-939B

Step One: Turn on the component you wish to operate.

Step Two: Press the corresponding DEVICE button and

the MUTE button, simultaneously for one second or

more. The LED will light for 20 seconds.

Step Three: Press and hold the CH UP or CH DOWN but-

ton. This sends a succession of Power ON/OFF code sig-

nals that are stored in memory. Stop pressing the CH

button as soon as the component turns off, signifying that

you have found a code set that operates that component.

Step Four: Press the DEVICE button to store the code set

you have found. The button will blink twice to confirm

that you have stored the code.

Step Five: Test the remote control functions. If any do not

work properly, repeat the preceding steps until you find

the right code.

Displaying a Code Number

To find out which 3-digit code is currently stored on a DE-

VICE button:

Step One: Press the DEVICE button and the MUTE button

simultaneously for one second or more. The DEVICE but-

ton will light red for 20 seconds.

Step Two: Press the RECALL button. The DEVICE button

will blink a number of times, indicating the first digit in the

code, followed by a one second interval with the light off,

followed by a number of blinks indicating the second

digit, followed by another interval, followed by blinks in-

dicating the third digit. For example, one blink, three

blinks, and eight blinks, with one second intervals in be-

tween, represents the 3-digit code number 138.

Note: The number ZERO in a 3-digit code is represented

by 10 blinks.

Macro Programming

There are five MACRO buttons – the four labeled M1, M2,

M3, and M4 plus the POWER button. When the RR-939B

is in the AUDIO, SAT, or CABLE mode, the macro buttons

can store and replay a sequence of up to 8 commands.

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Rotel RTC-965 Owner's Manual Page 5

Comments to this Manuals